Open Nav

Back to Support

Changing LED brightness

Updated on 20 August, 2021

Changing diode's brightness requires a Bluetooth compatible Mac or PC and Chrome browser.

  1. Enter chrome://flags/#enable-experimental-web-platform-features in your Chrome browser.
  2. Enable the highlighted flag.
  3. Restart Chrome.
  4. Visit debug console.
  5. Turn Aidlab on, so the pulsating green diode will indicate the pending connection.
  6. Type connect and press enter.
  7. Select Aidlab from the list.
  8. Wait till command prompt will be visible.
  9. Type set led_brght N (exchange N for value raging from 1 to 16) and press enter.

set led_brght 1 will completely remove light, while set led_brght 16 will set the light to the highest possible level.

24x7 Support over email

Can’t find your answer? Get in touch with our team—we‘re here to help.

Contact us
Technical questions on chat

Got any technical questions? Our support agents hang out on LiveChat.

Chat with agent


Sign up for our newsletter so you will never miss a thing about Aidlab.


United States

Aidlab's Logo

Aidlab™ is a registered trademark. Copyright © 2023

Aidlab™ is a registered trademark. Copyright © 2023