Product comparison

Aidlab 2 vs Bittium Faros Pro

Bittium Faros Pro is a medical ECG recorder with up to three channels and weeks per charge. Aidlab 2 adds breathing, EDA, temperature, and motion to ECG at the same rates.

Woman wearing Aidlab 2 on an electrode chest strap

At a glance

What each manufacturer documents for these models.

Aidlab 2 vs Bittium Faros Pro: signals at a glance
SignalAidlab 2Bittium Faros Pro
ECG1-lead, 250 Hz, configurable up to 1000 Hz1 to 3 channels, 250, 500, or 1000 Hz
RR intervalsYesYes
RespirationWaveform and rateNot listed
EDAYesNot listed
Skin temperatureYesNot listed
Motion9-axis3-axis acceleration, 25 or 100 Hz
Onboard memory4, 8, or 32 GB4 GB
BatteryUp to 24 hoursAbout 21 days in Holter mode
Developer accessPython, Android, Apple, Flutter, Unity SDKsNot listed
Medical deviceNot listedCE marked under EU MDR
List priceFrom $729Not listed
Compared model

Bittium Faros Pro

Chest-worn ECG recorder on a patch or electrode cables

  • 1 channel on the EasyFlex patch, up to 3 channels with cable sets, at 250, 500, or 1000 Hz [8]
  • 4 GB of memory, about 90 days of 1-channel ECG at 250 Hz, and about 21 days of battery in Holter mode [8]
  • CE marked as a medical device under the EU Medical Device Regulation [8][9]
View official Bittium Faros Pro documentation
Editorial interpretation

The 30-second verdict

This decision guide is Aidlab's interpretation of the documented capabilities below.

Choose Aidlab 2 if

  • Breathing, EDA, temperature, or motion belong in the same recording as ECG.
  • Your app should receive samples live over Bluetooth LE.
  • You want to work in Python, a mobile app, Flutter, or Unity.

Choose Bittium Faros Pro if

  • The protocol needs two or three ECG channels.
  • Recordings should run for days or weeks without charging.
  • The study requires a CE-marked medical device and clinical Holter analysis.

Decision boundary

Faros is the longer, multi-channel ECG recorder. Aidlab 2 adds the other signals and the developer path. Decide by the channels and days you need.

Documented capabilities

ECG depth versus signal breadth

Both record ECG at up to 1000 Hz. The rows show where they differ: channels, other signals, recording length, and access.

Aidlab 2 vs Bittium Faros Pro: documented product capabilities
CriterionAidlab 2Bittium Faros ProEditorial interpretation
ECG1-lead ECG at 250 Hz by default, configurable to 500 or 1000 Hz1 channel on the patch, up to 3 with cable sets, at 250, 500, or 1000 Hz

Faros wins when the protocol needs more than one ECG channel.

Sources:[4][6][8]

Other signalsRespiration waveform, EDA, skin temperature, 9-axis motion, and GNSS3-axis acceleration

Aidlab 2 records breathing and stress-related signals that Faros Pro does not list.

Sources:[1][4][8]

Recording length4, 8, or 32 GB of memory and up to 24 hours per charge4 GB, about 90 days of 1-channel ECG, and about 21 days per charge

For recordings longer than a day without charging, Faros is the stronger fit.

Sources:[1][5][8]

Live dataBluetooth LE streaming into Aidlab SDKsOnline mode over Bluetooth Classic with compatible Bittium software

Aidlab 2 is built to feed your own app in real time.

Sources:[2][3][8]

SoftwareSDKs for Python, Android, Apple platforms, Flutter, and UnityBittium Device Manager, EDF files, and Cardiac Navigator for HRV, QT, and ST

Bittium supplies clinical analysis; Aidlab 2 supplies the building blocks.

Sources:[3][8][10]

Regulatory statusResearch and development wearable, not a medical deviceCE marked under the EU Medical Device Regulation

When the study requires a certified medical ECG device, choose Faros.

Sources:[1][8][9]

ECG

Aidlab 2

1-lead ECG at 250 Hz by default, configurable to 500 or 1000 Hz

Bittium Faros Pro

1 channel on the patch, up to 3 with cable sets, at 250, 500, or 1000 Hz

Editorial interpretation

Faros wins when the protocol needs more than one ECG channel.

Sources:[4][6][8]

Other signals

Aidlab 2

Respiration waveform, EDA, skin temperature, 9-axis motion, and GNSS

Bittium Faros Pro

3-axis acceleration

Editorial interpretation

Aidlab 2 records breathing and stress-related signals that Faros Pro does not list.

Sources:[1][4][8]

Recording length

Aidlab 2

4, 8, or 32 GB of memory and up to 24 hours per charge

Bittium Faros Pro

4 GB, about 90 days of 1-channel ECG, and about 21 days per charge

Editorial interpretation

For recordings longer than a day without charging, Faros is the stronger fit.

Sources:[1][5][8]

Live data

Aidlab 2

Bluetooth LE streaming into Aidlab SDKs

Bittium Faros Pro

Online mode over Bluetooth Classic with compatible Bittium software

Editorial interpretation

Aidlab 2 is built to feed your own app in real time.

Sources:[2][3][8]

Software

Aidlab 2

SDKs for Python, Android, Apple platforms, Flutter, and Unity

Bittium Faros Pro

Bittium Device Manager, EDF files, and Cardiac Navigator for HRV, QT, and ST

Editorial interpretation

Bittium supplies clinical analysis; Aidlab 2 supplies the building blocks.

Sources:[3][8][10]

Regulatory status

Aidlab 2

Research and development wearable, not a medical device

Bittium Faros Pro

CE marked under the EU Medical Device Regulation

Editorial interpretation

When the study requires a certified medical ECG device, choose Faros.

Sources:[1][8][9]

Bittium Faros 180 and 360 are older models certified under the previous EU directive; this page compares Faros Pro. Only Faros 360 lists temperature measurement.

Detailed view of the Aidlab 2 chest-worn sensor module
Record → transfer → analyze

A Holter recorder or a live data source

Faros is built for long recordings that you read out afterwards. Aidlab 2 also works as a live sensor for your own software.

1 · Record

Aidlab 2

Choose the signals to stream or store. ECG runs at 250 Hz by default and up to 1000 Hz.

Bittium Faros Pro

Configure 1 to 3 ECG channels and 250, 500, or 1000 Hz in Bittium Device Manager.

Same top sampling rate; Faros records more ECG channels.

2 · Transfer

Aidlab 2

Bluetooth LE streams to the SDK, and stored samples synchronize with their original timestamps.

Bittium Faros Pro

USB download to EDF files, or online mode over Bluetooth Classic with compatible Bittium software.

Faros uses Bluetooth Classic, not Bluetooth LE.

3 · Analyze

Aidlab 2

Your own code works with ECG, RR intervals, respiration, EDA, and motion.

Bittium Faros Pro

Bittium Cardiac Navigator, sold separately, analyzes HRV, QT, and ST.

Bittium includes the clinical analysis path; with Aidlab 2 you build your own.

Questions buyers ask

Frequently asked questions

What ECG sampling rates does Bittium Faros Pro support?

Bittium documents 250, 500, and 1000 Hz, with 1 channel on the EasyFlex patch and up to 3 channels with cable sets. Aidlab 2 offers the same three rates on a 1-lead ECG.

Can I stream Bittium Faros data into my own app?

Faros Pro streams over Bluetooth Classic in online mode with compatible software from Bittium, which provides the interfaces for third-party integrations. Aidlab 2 streams over Bluetooth LE into public SDKs for Python, Android, Apple platforms, Flutter, and Unity.

When is Bittium Faros the better choice?

When you need multi-channel ECG, recordings of days or weeks on one charge, or a CE-marked medical device with clinical Holter analysis.
Sources

Official documentation used

Every capability above links to the manufacturer documentation used.

Last reviewed

  1. Aidlab 2 product page

    Official model-specific signals, form factor, intended use, and availability.

  2. Aidlab SDK: data types and events

    Official signal definitions, units, storage behavior, and SDK callbacks.

  3. Aidlab SDK documentation

    Official integration documentation for supported platforms.

  4. Aidlab 2 support: measurement range and accuracy

    Official Aidlab 2 sampling rates, resolution, and measurement ranges.

  5. Aidlab 2 support: storage

    Official Aidlab 2 memory variants and recording without a phone.

  6. Aidlab SDK: configuration

    Official ECG sampling-frequency options and their effect on other signals.

  7. Bittium Faros product page

    Official Faros models, form factors, and specifications.

  8. Bittium Faros Pro instructions for use

    Official ECG channels, sampling rates, accelerometer, memory, battery, connectivity, and CE marking.

  9. Bittium Faros Pro launch release

    Official launch announcement and regulatory scope.

  10. Bittium cardiology brochure

    Official Faros lineup and Cardiac Navigator analysis.

Caveats

  • No controlled accuracy study between Aidlab 2 and Bittium Faros Pro was performed for this page.
  • Aidlab 2 is a research and development wearable, not a medical device.
  • Bittium publishes no Faros Pro prices. Its instructions for use say Bittium provides the interfaces for third-party software.
Next step

Review the documented requirements with your protocol

Compare the required signals, recording mode, connectivity, and data path before choosing a device.